New skylight installation in Austin means more than cutting a hole in the roof. The crew you're matched with picks curb mount or deck mount based on your roof pitch and framing, sizes the glazing to Austin's climate zone, and steps the flashing correctly so the unit sheds water instead of collecting it. A skylight permit is required inside Austin city limits because the work involves a roof penetration and structural framing, and the crew handles that paperwork as part of the job.
Homeowners search for this a few different ways. It also goes by skylight installation cost , install a skylight , and new skylight . They all reach the same insured local crews, and the operator who answers sorts out which one your job actually is.
Yes, anywhere in the Austin metro. Bright Sky ATX is a referral service covering all 64 cities and communities in the metro, so "installation near me" has the same answer wherever you are: call (737) 477-8898 and we connect you with an experienced, insured local crew who already works your area.
The reason that matters is that "near me" results are ranked by where Google thinks you are, not by who is genuinely closest. A search from Georgetown and a search from Kyle return different lists, and neither one tells you whether the company at the top actually sends anyone to your street. One call gets you a crew that does.
If you would rather go straight to your own city, every installation page in the metro is linked below.
A basic fixed skylight installed on an easy composition-shingle roof usually runs $400 to $1,200. A vented, remote-controlled unit with rain sensors and upgraded low-e glazing runs $900 to $2,800. Steep pitches, tile or metal roofing, and new framing between rafters add to the number. The crew you are matched with gives you a firm quote after a roof walk, not a phone estimate.
Deck mount sits flush against the roof deck and suits most standard-pitch composition shingle roofs common in Central Austin's mid-century ranch stock. Curb mount raises the unit on a short frame and is the standard choice for low-slope and flat roofs, which is why it's the default on many mid-century and commercial buildings across the metro. The crew evaluates your pitch and picks the method that sheds water correctly.
Yes. Skylight work is not on Austin's list of permit-exempt projects because it involves a roof penetration and structural framing changes. The crew you're matched with pulls the permit and schedules the inspection as part of the job, so you don't have to navigate the Development Services process yourself.
Not with the right glazing. Skylights installed to Austin's Climate Zone 2 energy code carry a U-factor around 0.60 and an SHGC (solar heat gain coefficient) at or below 0.30, which limits how much heat passes through the glass. Low-e coatings and argon fill cut heat gain further. A north- or east-facing skylight, or one with a solar shade, adds the least heat load.
A correctly flashed skylight from an experienced crew almost never leaks from the unit itself. Most skylight leaks trace back to failed flashing, cracked sealant, or a roofing material that was patched around the curb instead of properly stepped and counter-flashed. That's why flashing kit selection matched to your specific roofing material matters as much as the skylight itself.
We connect you with installation crews in every city and community in the Austin metro. Pick your city for local roof notes and service specifics.
Call and we will connect you with an experienced, insured local crew.